Remote control rotary electric actuator
Product Description
Product Detail
Torque range：30~5000N.m
Switching time：20~200 S
Working time : S1 long time standard for both On-off and modulating type.
S2 standard, 30 min.
Ambient temperature：-20℃~+70℃
Local Control Unit: Local control knob of open/close/stop, switch knob of close control remote control/Bus control(non-intrusive)
Display Mode: LCD, indication of opening(0-100%) and open/close fault
Control Mode: On-off signal control, Modulating (proportional regulation) control, Fieldbus Control etc.
1. Compact design:Small, light and compact design, high torque and various control option will meet your specific requirement.
2. Wide torque range:The torque of AOX-R series remote control rotary electric actuator is form 30Nm-5000Nm.
3. Fully enclosed squirrel-cage asynchronous motor:The motor of AOX-R series remote control rotary electric actuator is a specially designed induction motor that produces high starting torques and thermally protected from overheating.
The gearbox of AOX-R series remote control rotary electric actuator adopts aluminum alloy to be stronger than PPC material (PPC tensile strength 11.84MPL, temperature resistance 80°C, aluminum alloy tensile strength 75MPL, temperature resistance 400°C), gear is made of 40Cr after three heat treatment, stability Higher and more durable, with better high temperature resistance.
|
Model |
Max output torque |
Operating Time 90° |
Drive shaft(mm) |
Power |
Rated current（A） |
Weight |
|
|
N·M |
( 90°) |
Square |
Deep |
(W) |
220VAC/1ph |
(kg) |
|
|
AOX-R-003 |
30 |
20 |
11×11 |
15.5 |
8 |
0.25 |
2.1 |
|
AOX-R-005 |
50 |
30 |
14×14 |
18 |
10 |
0.24 |
3.6 |
|
AOX-R-008 |
80 |
30 |
14×14 |
18 |
10 |
0.26 |
3.6 |
|
AOX-R-010 |
100 |
30 |
17×17 |
22.5 |
15 |
0.40 |
4.6 |
|
AOX-R-015 |
150 |
40 |
17×17 |
22.5 |
15 |
0.42 |
4.6 |
|
AOX-R-020 |
200 |
30 |
22×22 |
26 |
60 |
0.28 |
13 |
|
AOX-R-030 |
300 |
30 |
22×22 |
26 |
60 |
0.32 |
13.4 |
|
AOX-R-040 |
400 |
30 |
22×22 |
26 |
60 |
0.34 |
13.8 |
|
AOX-R-060 |
600 |
40 |
27×27 |
32.5 |
60 |
0.35 |
14 |
|
AOX-R-080 |
800 |
40 |
27×27 |
32.5 |
90 |
0.56 |
14.3 |
|
AOX-R-100 |
1000 |
40 |
27×27 |
32.5 |
90 |
0.59 |
14.5 |
|
AOX-R-160 |
1600 |
60 |
Max Φ40 |
65 |
90 |
0.60 |
68 |
|
AOX-R-200 |
2000 |
60 |
Max Φ40 |
65 |
90 |
0.62 |
68 |
|
AOX-R-300 |
3000 |
120 |
Max Φ40 |
65 |
90 |
0.64 |
68 |
|
AOX-R-400 |
4000 |
200 |
Max Φ40 |
65 |
90 |
0.66 |
68 |
|
AOX-R-500 |
5000 |
200 |
Max Φ40 |
65 |
90 |
0.67 |
68 |
|
Shell |
Aluminum alloy Shell, Enclosure:IP67,IP68 is optional |
|
|
Power |
Standard:220VAC/1ph Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz, ±10% 24VDC/110VDC/220VDC |
|
|
Controlling power |
110/220VAC/1ph，50/60 Hz, ±10% |
|
|
Motor |
Squirrel-cage asynchronous motor |
|
|
Limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Auxiliary limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Travel |
90°～270°±10°(Please specify in advance if over 90°) |
0°～270° |
|
Fail safe/ |
Internal-placed thermal protection, Open 120℃ ±5℃/Close 97℃ ± 5℃ |
|
|
Indicator |
Continuous situation indication |
|
|
Manual operation |
Mechanical handle（Handwheel is optional） |
|
|
Self-locking device |
Self-locking by worm and worm gear |
|
|
Mechanical limit |
2 x external adjustable stopper |
|
|
Space heater |
30W (110/220VAC) Anti-condensation |
|
|
Conduit entries |
2 Pieces M18*1.5（AOX-R-003 except） |
|
|
Ambient temperature |
-25℃～+70℃（-30℃、-40℃、-60℃ optional） |
|
|
Lubrication |
Grease moly（EP type） |
|
|
Material |
Steel, Aluminum alloy, Aluminum bronze, Polycarbonate |
|
|
Ambient humidity |
Max 90％RH |
Non-Condensing |
|
Anti-vibration |
X Y Z 10g,0.2～34 Hz,30 minutes |
|
|
External coating |
Dry powder, Epoxy polyester |
|
|
No. |
Option scheme |
Remark |
|
1 |
Heater |
AOX-R Series |
|
2 |
Water-proof actuator(IP68,10M,250HR) |
AOX-R Series |
|
3 |
Potentionmeter unit(1k-10k) |
Exceot AOX-R-003 |
|
4 |
Proportion control unit(Control signal 4-20mA DC/1-5V/10V) |
AOX-R Series |
|
5 |
Local control units (Local control open/stop/close optional switch, local/remote switch) |
Exceot AOX-R-003 |
|
6 |
Travel 120°, 180°,270° |
AOX-R Series |
|
7 |
Direct current motor(24VDC) |
AOX-R Series |
|
8 |
Electric current position sensor (Output 4-20mA DC) |
Exceot AOX-R-003 |
|
9 |
Self-reset when power failure |
AOX-R Series |
|
10 |
Quick opening(2.8s,5s,10s,15s) |
AOX-R Series |
Installation, maintenance and storage
1 There should be no loose clearance at all joints of the actuator and the adjustment mechanism to ensure good adjustment effect, and the connection bolt should be evenly and symmetrically tightened during installation.
2 AOX-R series remote control rotary electric actuator should be maintained frequently. For places with high vibration, always check whether the fasteners are loose, whether the connectors are in good contact and whether the locking is reliable.
3 Pay attention to the handling during transportation, and use the forklift to load and unload according to the weight of the actuator mechanism model to avoid impact and damage the quality of the product.
4 AOX-R series remote control rotary electric actuator should be stored in a dry and ventilated room. To prevent moisture intrusion from the ground, it should be placed on the shelf or separated by wooden boards.
In ensuring product quality at the same time, we also pay attention to the details of control, especially product packaging, fine packaging can effectively ensure the appearance of AOX-R series remote control rotary electric actuator and give customers a good experience.
Q: Which port are you shipping?
A:We can ship the goods to Ningbo or Shanghai Port.
Q:How to control quality of AOX-R series remote control rotary electric actuator?
A :1, all the raw materials by IQC( Incoming Quality Control) before launch whole process into the process after the screening.
2, process each link in the process of IPQ(Input process quality control ) patrol inspection.
3, after finished by QC full inspection before packing into the next proceess packing.
Q: How long can I expect to get the sample of AOX-R series remote control rotary electric actuator?
A :The samples will be ready for delivery in 3-5 days The samples will be sent va international express such as DHL ,UPS ,TNT, FEDEX and would be arrived within 3-5 days.