Remote control quarter turn electric actuator
Product Description
Product Detail
Torque range:50~6000N.m
Control method:On and off / modulating type/ Intelligent type
Voltage:AC110~265V , AC / DC 24V Multi voltage input
Local Control Unit: Local control knob of open/close/stop, switch knob of close control remote control/prohibit control(non-intrusive)
Display Mode: LCD, indication of opening(0-100%) and open/close fault
1. Various output torque from 50Nm to 6000Nm.
2. Handwheel:Different sizes depending on actuator torque, made of aluminum alloy, effortless operation.
3. Motor:AOX-Q series remote control quarter turn electric actuator have specially designed induction motor to generate high starting torque and high efficiency equipped with thermal protector to prevent damage from over heating.
4. Window:Polycarbonate window for AOX-Q series remote control quarter turn electric actuator, built-in O-rings,fixed metal gland, the gland comes with two drainage channels to prevent water,easy to observe.
Model |
Max Output Torque |
60/50Hz Operating Time |
Max Drive Shaft Size |
Power |
Rated Current(A) |
Hand wheel Revolution |
Weight |
|||
single phase |
three phases |
|||||||||
N·M |
90° |
mm |
W |
110V |
220V |
380V |
440V |
N |
Kg |
|
AOX-Q-005 |
50 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
AOX-Q-008 |
80 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
AOX-Q-010 |
100 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
AOX-Q-015 |
150 |
21/25 |
Φ20 |
40 |
1.65/1.67 |
0.88/0.84 |
0.31/0.31 |
0.30/0.31 |
11 |
17.3 |
AOX-Q-020 |
200 |
21/25 |
Φ20 |
40 |
1.67/1.67 |
0.89/0.85 |
0.31/0.31 |
0.30/0.31 |
11 |
17.3 |
AOX-Q-030 |
300 |
26/31 |
Φ32 |
90 |
1.85/1.86 |
0.92/0.92 |
0.35/0.35 |
0.34/0.34 |
13.5 |
22 |
AOX-Q-050 |
500 |
26/31 |
Φ32 |
120 |
3.60/3.62 |
1.55/1.58 |
0.59/0.59 |
0.58/0.58 |
13.5 |
23 |
AOX-Q-060 |
600 |
26/31 |
Φ32 |
120 |
3.65/3.62 |
1.60/2.20 |
0.60/0.59 |
0.59/0.58 |
13.5 |
23 |
AOX-Q-080 |
800 |
31/37 |
Φ40 |
180 |
4.10/4.10 |
2.15/2.20 |
0.85/0.85 |
0.79/0.79 |
16.5 |
29 |
AOX-Q-120 |
1200 |
31/37 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
16.5 |
29 |
AOX-Q-150 |
1500 |
78/93 |
Φ40 |
120 |
3.65/3.62 |
1.60/2.20 |
0.60/0.59 |
0.59/0.58 |
40.5 |
77 |
AOX-Q-200 |
2000 |
93/112 |
Φ40 |
180 |
4.10/4.10 |
2.15/2.20 |
0.85/0.85 |
0.79/0.79 |
49.5 |
83 |
AOX-Q-300 |
3000 |
93/112 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
49.5 |
83 |
AOX-Q-400 |
4000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
AOX-Q-500 |
5000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
AOX-Q-600 |
6000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
Shell |
Enclosure :IP67,NEMA4, Exd II CT5 |
|
Power |
Standard:220VAC/1ph Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz, ±10% 24VDC/110VDC/220VDC |
|
Motor |
Asynchronous motor |
|
Limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
Auxiliary limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
Torque switch |
Close/Open, each 1, SPDT,250VAC 10A |
Except AOX-Q-005/008/010 |
Travel |
90°±10° |
0°~270° |
Fail safe/ |
Internal-placed thermal protection, Open 120℃ ±5℃/Close 97℃ ± 5℃ |
|
Indicator |
Continuous position indicator |
|
Manual operate |
Declutching mechanism, operate by handwheel |
|
Self-locking device |
Self-locking by worm and worm gear |
|
Mechanical limit |
2 × external adjustable stopper |
|
Space heater |
30W(110V/220VAC) |
|
Conduit entry |
2 × PT 3/4” |
|
Ambient temperature |
-25℃~+70℃(-30℃、-40℃、-60℃ optional) |
|
Lubrication |
Grease moly(EP type) |
|
Material |
Steel, Aluminum alloy, Aluminum bronze,Polycarbonate |
|
Ambient humidity |
Max 90%RH |
Non-Condensing |
Anti-vibration |
X Y Z 10g,0.2~34 Hz,30 minutes |
|
External coating |
Dry powder, Epoxy polyester,high anti-corrosion |
No. |
Option scheme |
Remark |
1 |
Explosion-proof actuator(Exd ⅡCT5) |
AOX-Q series |
2 |
Potentiometer unit(1K-10K) |
AOX-Q series |
3 |
Proportion control unit (control signal 4-20mA DC/1-5V/1-10V) |
AOX-Q series |
4 |
Local control units (local control open/stop/close optional switch, local/remote switch) |
AOX-Q series |
5 |
Travel 120°, 180°,270° |
AOX-Q series |
6 |
Direct current motor(24VDC) |
AOX-Q series |
7 |
Water-proof actuator (IP68,10M,250HR) |
AOX-Q series |
8 |
Reverse electromagnetic control and transmission integrated motor starter |
AOX-Q series |
9 |
Torque switch (SPDT× 2 250VAC 10A) |
Except AOX-Q-005/008/010 |
10 |
Electric current position sensor (output 4-20mA DC) |
AOX-Q series |
11 |
High temperature resistance actuator (-10℃~+100℃) |
AOX-Q series |
12 |
Low temperature resistance actuator (-60℃~+30℃) |
AOX-Q series |
13 |
Low speed actuator |
AOX-Q series |
14 |
Bus-control unit |
AOX-Q series |
AOX believes that only a solid software and hardware foundation can achieve long-term and stable development. We have established some advanced computer aided systems, such as product design, resource management, production management and so on. A precision machining platform with CNC machining center as the core is established. We will continue to establish and improve a documented management system to produce more reailable AOX-Q series remote control quarter turn electric actuator for all our customers.If you are interested in our products,please contact me by E-mail zjaox09@zjaox.com.
In order to better display the company's products especially AOX-Q series remote control quarter turn electric actuator and enhance the company's popularity, our company actively participates in major exhibitions at home and abroad, in Germany VALVE WORLD, AHEMA, Russia PCV Expo, ECWATCH, Malaysia ASIA WATER, Thailand THAIWATER, Indonesia Indowater, Shanghai Flowtech, etc.You all can see us at these exhibitions.
1 There should be no loose clearance at all joints of the actuator and the adjustment mechanism to ensure good adjustment effect, and the connection bolt should be evenly and symmetrically tightened during installation.
2 The handle and the transmission mechanism are not allowed to be lifted during transportation.
3 Before using the AOX-Q series remote control quarter turn electric actuator, carefully read the instruction manual and check and verify according to the specified inspection method. Before the electric actuator is put into operation, check whether the power supply voltage at the site is in accordance with the regulations. At the same time, check the wiring according to the specified electrical installation wiring diagram. Pay attention to the wire number when wiring, and the wiring of each terminal should be firm.
Q:Can you send me more detail information about the AOX-Q series remote control quarter turn electric actuator?
A:Yes,you can send me mail about your inquiry and I’ll send you he detal information you need.
Q:What is the minimum quantity of an order for your AOX-Q series remote control quarter turn electric actuator?
A:We don't have the request for the minimum order value.So you can buy even one piece from us.
Q: Which port are you shipping?
A:Usually we ship to Shanghai and Ningbo Port