Quarter turn actuator with torque switch
Product Description
Product Detail
Quarter turn actuator with torque switch
Torque range：50~6000N.m
Control method：On and off / modulating type/ Intelligent type
Protection：IP67, (IP68 optional) ExdⅡ CT5
Manual Override：Yes
Torque switch:Close/Open, each 1
Mounting Flange（ISO 5211）：F05/F07/F10/F12/F14/F16
Output signal(On-off type): Fully open & fully close passive contact(2A 250VAC).
1. Various output torque from 50Nm to 6000Nm.
2. Self locking:AOX-Q series quarter turn electric actuator with torque switch provided by double worm gearing to keep position of valve unchanged against reverse torque from valve.
3. Sealing:By O-ring in all interfaces IP67(standard), and double o-ring for IP68 (option).
4. Torque switches (except for AOX-Q-005/008/010)
- Protect actuator from damage caused by overload from the driven valve over the whole travel.
- Once the torque switching acts, the AOX-Q series quarter turn electric actuator with torque switch will be stopped immediately.
|
Model |
Max Output Torque |
60/50Hz |
Max Drive Shaft Size |
Power |
Rated Current（A） |
Hand |
Weight |
|||
|
single phase |
three phases |
|||||||||
|
N·M |
90° |
mm |
W |
110V |
220V |
380V |
440V |
N |
Kg |
|
|
AOX-Q-005 |
50 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
|
AOX-Q-008 |
80 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
|
AOX-Q-010 |
100 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
|
AOX-Q-015 |
150 |
21/25 |
Φ20 |
40 |
1.65/1.67 |
0.88/0.84 |
0.31/0.31 |
0.30/0.31 |
11 |
17.3 |
|
AOX-Q-020 |
200 |
21/25 |
Φ20 |
40 |
1.67/1.67 |
0.89/0.85 |
0.31/0.31 |
0.30/0.31 |
11 |
17.3 |
|
AOX-Q-030 |
300 |
26/31 |
Φ32 |
90 |
1.85/1.86 |
0.92/0.92 |
0.35/0.35 |
0.34/0.34 |
13.5 |
22 |
|
AOX-Q-050 |
500 |
26/31 |
Φ32 |
120 |
3.60/3.62 |
1.55/1.58 |
0.59/0.59 |
0.58/0.58 |
13.5 |
23 |
|
AOX-Q-060 |
600 |
26/31 |
Φ32 |
120 |
3.65/3.62 |
1.60/2.20 |
0.60/0.59 |
0.59/0.58 |
13.5 |
23 |
|
AOX-Q-080 |
800 |
31/37 |
Φ40 |
180 |
4.10/4.10 |
2.15/2.20 |
0.85/0.85 |
0.79/0.79 |
16.5 |
29 |
|
AOX-Q-120 |
1200 |
31/37 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
16.5 |
29 |
|
AOX-Q-150 |
1500 |
78/93 |
Φ40 |
120 |
3.65/3.62 |
1.60/2.20 |
0.60/0.59 |
0.59/0.58 |
40.5 |
77 |
|
AOX-Q-200 |
2000 |
93/112 |
Φ40 |
180 |
4.10/4.10 |
2.15/2.20 |
0.85/0.85 |
0.79/0.79 |
49.5 |
83 |
|
AOX-Q-300 |
3000 |
93/112 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
49.5 |
83 |
|
AOX-Q-400 |
4000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
|
AOX-Q-500 |
5000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
|
AOX-Q-600 |
6000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
|
Shell |
Enclosure :IP67,NEMA4, Exd II CT5 |
|
|
Power |
Standard:220VAC/1ph Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz, ±10% 24VDC/110VDC/220VDC |
|
|
Motor |
Asynchronous motor |
|
|
Limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Auxiliary limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Torque switch |
Close/Open, each 1, SPDT,250VAC 10A |
Except AOX-Q-005/008/010 |
|
Travel |
90°±10° |
0°～270° |
|
Fail safe/ |
Internal-placed thermal protection, Open 120℃ ±5℃/Close 97℃ ± 5℃ |
|
|
Indicator |
Continuous position indicator |
|
|
Manual operate |
Declutching mechanism, operate by handwheel |
|
|
Self-locking device |
Self-locking by worm and worm gear |
|
|
Mechanical limit |
2 × external adjustable stopper |
|
|
Space heater |
30W(110V/220VAC) |
|
|
Conduit entry |
2 × PT 3/4” |
|
|
Ambient temperature |
-25℃～+70℃（-30℃、-40℃、-60℃ optional） |
|
|
Lubrication |
Grease moly（EP type） |
|
|
Material |
Steel, Aluminum alloy, Aluminum bronze,Polycarbonate |
|
|
Ambient humidity |
Max 90％ RH |
Non-Condensing |
|
Anti-vibration |
X Y Z 10g,0.2～34 Hz,30 minutes |
|
|
External coating |
Dry powder, Epoxy polyester,high anti-corrosion |
|
|
No. |
Option scheme |
Remark |
|
1 |
Explosion-proof actuator（Exd ⅡCT5） |
AOX-Q series |
|
2 |
Potentiometer unit（1K-10K） |
AOX-Q series |
|
3 |
Proportion control unit (control signal 4-20mA DC/1-5V/1-10V) |
AOX-Q series |
|
4 |
Local control units (local control open/stop/close optional switch, local/remote switch) |
AOX-Q series |
|
5 |
Travel 120°, 180°,270° |
AOX-Q series |
|
6 |
Direct current motor(24VDC) |
AOX-Q series |
|
7 |
Water-proof actuator (IP68,10M,250HR) |
AOX-Q series |
|
8 |
Reverse electromagnetic control and transmission integrated motor starter |
AOX-Q series |
|
9 |
Torque switch (SPDT× 2 250VAC 10A) |
Except AOX-Q-005/008/010 |
|
10 |
Electric current position sensor (output 4-20mA DC) |
AOX-Q series |
|
11 |
High temperature resistance actuator (-10℃～+100℃) |
AOX-Q series |
|
12 |
Low temperature resistance actuator (-60℃～+30℃) |
AOX-Q series |
|
13 |
Low speed actuator |
AOX-Q series |
|
14 |
Bus-control unit |
AOX-Q series |
Zhejiang Aoxiang Automation Technology Co., Ltd. (formerly known as Rui'an Changhong Automation Instrument Co., Ltd.) was founded on April 7, 1997. Later, it was changed to Zhejiang Aoxiang Automation Technology Co., Ltd. due to the registered capital of the merger application. The company is located at No. 2608, Development road, Economic Development Zone, Ruian City. It covers an area of 12,300 square meters, with a construction area of 16,200 square meters. The production plant area is 12,600 square meters. It is only 20 kilometers away from Wenzhou Airport and Wenzhou Railway Station. The traffic is convenient. The company is a high-tech enterprise specializing in the production of electric actuators for nearly 20 years, integrating design, research and development, production, sales, after-sales service and training.The annual production capacity is more than 60,000 units. The products are widely used in petroleum and chemical industry. , water treatment, shipbuilding, paper, power stations, light industry and other fields.If you are interested in our small quarter turn electric electric actuator, welcome to contact us by Email-zjaox09@zjaox.com.
Our company has been engaged in the manufacture of electric actuators for more than 20 years. It has mature manufacturing technology and perfect production equipment, with an annual production capacity of 60,000 electric actuators. The main processing equipment includes machining center, CNC lathe, CNC milling machine, CNC drilling machine, CNC drilling machine, plasma spray welding equipment, spray drying line and other equipment, milling, boring, drilling, throwing, grinding and other types of machine tools More than 300 sets of equipment, equipment are purchased from well-known domestic companies, high production efficiency, high processing accuracy.
Our company invested a large amount of funds in technology development for technology research and development and new product development. There are 89 patents in total, including 3 invention patents, 27 utility model patents, 49 design patents, and 4 invention patents. 2 utility model patents.
Our company has obtained various domestic and foreign certifications such as IS09001, ISO14001, CE, ATEX, GOST, EAC, SIL3, IP68, CU-TR, explosion-proof, etc., which fully demonstrates that our products fully comply with international standards, and the quality of products is guaranteed.
Q:How's the warranty period for your actuator?
A:We offer one year warranty for our small quarter turn electric actuator.
Q: About the sample what is the cost of transportation?
A :The freight depends on weight, packding size and your country or province region, etc.
Q:How long can I expect to get the sample?
A :If you want to order the sample of small quarter turn electric actuator,the samples will be ready for delivery in 3-5 days The samples will be sent va international express such as DHL ,UPS ,TNT, FEDEX and would be arrived within 3-5 days