Part turn electric actuator with torque switch
Product Description
Product Detail
Torque range：50~6000N.m
Switching time：22~185 S
Protection：IP67, (IP68 optional) ExdⅡ CT5
Voltage：AC110~265V , AC / DC 24V Multi voltage input
Material of Actuator Body: Aluminium Alloy
Torque switch:Close/Open, each 1
Mounting Flange（ISO 5211）：F05/F07/F10/F12/F14/F16
Local Control Unit: Local control knob of open/close/stop, switch knob of close control remote control/prohibit control(non-intrusive)
1. Wide range of voltage available
2. Window for AOX-Q series part turn electric actuator with torque switch:Polycarbonate window, built-in O-rings,fixed metal gland, the gland comes with two drainage channels to prevent water,easy to observe.
3. Removable drive bushing for AOX-Q series part turn electric actuator with torque switch
- Easy mounting base standard to ISO5211.
- Bushings can be processed according to different requirements, four hanging ears made a close fit with shaft and sleeve.
|
Model |
Max Output Torque |
60/50Hz Operating Time |
Max Drive Shaft Size |
Power |
Rated Current（A） |
Hand wheel Revolution |
Weight |
|||
|
single phase |
three phases |
|||||||||
|
N·M |
90° |
mm |
W |
110V |
220V |
380V |
440V |
N |
Kg |
|
|
AOX-Q-005 |
50 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
|
AOX-Q-008 |
80 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
|
AOX-Q-010 |
100 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
|
AOX-Q-015 |
150 |
21/25 |
Φ20 |
40 |
1.65/1.67 |
0.88/0.84 |
0.31/0.31 |
0.30/0.31 |
11 |
17.3 |
|
AOX-Q-020 |
200 |
21/25 |
Φ20 |
40 |
1.67/1.67 |
0.89/0.85 |
0.31/0.31 |
0.30/0.31 |
11 |
17.3 |
|
AOX-Q-030 |
300 |
26/31 |
Φ32 |
90 |
1.85/1.86 |
0.92/0.92 |
0.35/0.35 |
0.34/0.34 |
13.5 |
22 |
|
AOX-Q-050 |
500 |
26/31 |
Φ32 |
120 |
3.60/3.62 |
1.55/1.58 |
0.59/0.59 |
0.58/0.58 |
13.5 |
23 |
|
AOX-Q-060 |
600 |
26/31 |
Φ32 |
120 |
3.65/3.62 |
1.60/2.20 |
0.60/0.59 |
0.59/0.58 |
13.5 |
23 |
|
AOX-Q-080 |
800 |
31/37 |
Φ40 |
180 |
4.10/4.10 |
2.15/2.20 |
0.85/0.85 |
0.79/0.79 |
16.5 |
29 |
|
AOX-Q-120 |
1200 |
31/37 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
16.5 |
29 |
|
AOX-Q-150 |
1500 |
78/93 |
Φ40 |
120 |
3.65/3.62 |
1.60/2.20 |
0.60/0.59 |
0.59/0.58 |
40.5 |
77 |
|
AOX-Q-200 |
2000 |
93/112 |
Φ40 |
180 |
4.10/4.10 |
2.15/2.20 |
0.85/0.85 |
0.79/0.79 |
49.5 |
83 |
|
AOX-Q-300 |
3000 |
93/112 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
49.5 |
83 |
|
AOX-Q-400 |
4000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
|
AOX-Q-500 |
5000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
|
AOX-Q-600 |
6000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
|
Shell |
Enclosure :IP67,NEMA4, Exd II CT5 |
|
|
Power |
Standard:220VAC/1ph Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz, ±10% 24VDC/110VDC/220VDC |
|
|
Motor |
Asynchronous motor |
|
|
Limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Auxiliary limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Torque switch |
Close/Open, each 1, SPDT,250VAC 10A |
Except AOX-Q-005/008/010 |
|
Travel |
90°±10° |
0°～270° |
|
Fail safe/ |
Internal-placed thermal protection, Open 120℃ ±5℃/Close 97℃ ± 5℃ |
|
|
Indicator |
Continuous position indicator |
|
|
Manual operate |
Declutching mechanism, operate by handwheel |
|
|
Self-locking device |
Self-locking by worm and worm gear |
|
|
Mechanical limit |
2 × external adjustable stopper |
|
|
Space heater |
30W(110V/220VAC) |
|
|
Conduit entry |
2 × PT 3/4” |
|
|
Ambient temperature |
-25℃～+70℃（-30℃、-40℃、-60℃ optional） |
|
|
Lubrication |
Grease moly（EP type） |
|
|
Material |
Steel, Aluminum alloy, Aluminum bronze,Polycarbonate |
|
|
Ambient humidity |
Max 90％RH |
Non-Condensing |
|
Anti-vibration |
X Y Z 10g,0.2～34 Hz,30 minutes |
|
|
External coating |
Dry powder, Epoxy polyester,high anti-corrosion |
|
|
No. |
Option scheme |
Remark |
|
1 |
Explosion-proof actuator（Exd ⅡCT5） |
AOX-Q series |
|
2 |
Potentiometer unit（1K-10K） |
AOX-Q series |
|
3 |
Proportion control unit (control signal 4-20mA DC/1-5V/1-10V) |
AOX-Q series |
|
4 |
Local control units (local control open/stop/close optional switch, local/remote switch) |
AOX-Q series |
|
5 |
Travel 120°, 180°,270° |
AOX-Q series |
|
6 |
Direct current motor(24VDC) |
AOX-Q series |
|
7 |
Water-proof actuator (IP68,10M,250HR) |
AOX-Q series |
|
8 |
Reverse electromagnetic control and transmission integrated motor starter |
AOX-Q series |
|
9 |
Torque switch (SPDT× 2 250VAC 10A) |
Except AOX-Q-005/008/010 |
|
10 |
Electric current position sensor (output 4-20mA DC) |
AOX-Q series |
|
11 |
High temperature resistance actuator (-10℃～+100℃) |
AOX-Q series |
|
12 |
Low temperature resistance actuator (-60℃～+30℃) |
AOX-Q series |
|
13 |
Low speed actuator |
AOX-Q series |
|
14 |
Bus-control unit |
AOX-Q series |
Installation, maintenance and storage
1. There should be no loose clearance at all joints of the AOX-Q series part turn electric actuator with torque switch and the adjustment mechanism to ensure good adjustment effect, and the connection bolt should be evenly and symmetrically tightened during installation.
2. Before using the AOX-Q series part turn electric actuator with torque switch, carefully read the instruction manual and check and verify according to the specified inspection method. Before the electric actuator is put into operation, check whether the power supply voltage at the site is in accordance with the regulations. At the same time, check the wiring according to the specified electrical installation wiring diagram. Pay attention to the wire number when wiring, and the wiring of each terminal should be firm.
3. Electric actuators should be maintained frequently. For places with high vibration, always check whether the fasteners are loose, whether the connectors are in good contact and whether the locking is reliable.
4. It should be stored in a dry and ventilated room. To prevent moisture intrusion from the ground, it should be placed on the shelf or separated by wooden boards.
AOX will continue to develop more advanced products integrating high technology and be ready the most reliable solution.AOX-Q series part turn electric actuator with torque switch mounting with valve can be applied to power station, iron and steel, petroleum, chemical, oil pipelines, sewage treatment automatic control system.
We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.
Q: Can we have our logo or comany name to be printed on your AOX-Q series part turn electric actuator with torque switch or package?
A :Sure. Your Logo could be printed on our products by sticker.
Q:What does AOX offer?
A:We offer: Electric actuator(AOX-R,AOX-Q,AOX-L,AOX-QL,AOX-M).
Pneumatic actuator(AOX-P). Limit switch box(APL-210N,ASK-510N).
Q:Can I get a sample before the order AOX-Q series part turn electric actuator with torque switch because I really don't how is your actuator quality?
A:Of course! We also think sample order is the best way to build the trust.