Part turn electric actuator with handwheel
Product Description
Product Detail
Part turn electric actuator with handwheel
Torque range：50~6000N.m
Ambient temperature：-20℃~+70℃ (-40℃ -60℃ is optional)
Control method：On and off / modulating type/ Intelligent type
Applicable valve : Ball Valve (DN15-DN200); Butterfly Valve (DN25-DN400)
Material of Actuator Body: Aluminium Alloy
Related humidity: <90%(25℃).
Manual Override：Yes
Torque switch:Close/Open, each 1
Type of Modulating Signal: 0-10V, 2-10V, 4-20mA, etc.
Type of Field-bus Signal: Modbus-RTU, Profibus-DP, etc.
Local Controller: AOX remote control(Optional)
1. Rugged construction with o-ring system giving water and explosionproof.
(optional : explosionproof/Exd IIC T5, IP68)
2. Motor for AOX-Q series part-turn electric actuator with handwheel:Specially designed induction motor to generate high starting torque and high efficiency equipped with thermal protector to prevent damage from over heating.
3. Limit switches for AOX-Q series part-turn electric actuator with handwheel
-It is fastened by the two screws above,the setting is simple, each cam can be set separately.
-Once the setup is complete, each cam will always remain in this position.
|
Model |
Max Output Torque |
60/50Hz Operating Time |
Max Drive Shaft Size |
Power |
Rated Current（A） |
Hand wheel Revolution |
Weight |
|||
|
single phase |
three phases |
|||||||||
|
N·M |
90° |
mm |
W |
110V |
220V |
380V |
440V |
N |
Kg |
|
|
AOX-Q-005 |
50 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
|
AOX-Q-008 |
80 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
|
AOX-Q-010 |
100 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
|
AOX-Q-015 |
150 |
21/25 |
Φ20 |
40 |
1.65/1.67 |
0.88/0.84 |
0.31/0.31 |
0.30/0.31 |
11 |
17.3 |
|
AOX-Q-020 |
200 |
21/25 |
Φ20 |
40 |
1.67/1.67 |
0.89/0.85 |
0.31/0.31 |
0.30/0.31 |
11 |
17.3 |
|
AOX-Q-030 |
300 |
26/31 |
Φ32 |
90 |
1.85/1.86 |
0.92/0.92 |
0.35/0.35 |
0.34/0.34 |
13.5 |
22 |
|
AOX-Q-050 |
500 |
26/31 |
Φ32 |
120 |
3.60/3.62 |
1.55/1.58 |
0.59/0.59 |
0.58/0.58 |
13.5 |
23 |
|
AOX-Q-060 |
600 |
26/31 |
Φ32 |
120 |
3.65/3.62 |
1.60/2.20 |
0.60/0.59 |
0.59/0.58 |
13.5 |
23 |
|
AOX-Q-080 |
800 |
31/37 |
Φ40 |
180 |
4.10/4.10 |
2.15/2.20 |
0.85/0.85 |
0.79/0.79 |
16.5 |
29 |
|
AOX-Q-120 |
1200 |
31/37 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
16.5 |
29 |
|
AOX-Q-150 |
1500 |
78/93 |
Φ40 |
120 |
3.65/3.62 |
1.60/2.20 |
0.60/0.59 |
0.59/0.58 |
40.5 |
77 |
|
AOX-Q-200 |
2000 |
93/112 |
Φ40 |
180 |
4.10/4.10 |
2.15/2.20 |
0.85/0.85 |
0.79/0.79 |
49.5 |
83 |
|
AOX-Q-300 |
3000 |
93/112 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
49.5 |
83 |
|
AOX-Q-400 |
4000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
|
AOX-Q-500 |
5000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
|
AOX-Q-600 |
6000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
|
Shell |
Enclosure :IP67,NEMA4, Exd II CT5 |
|
|
Power |
Standard:220VAC/1ph Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz, ±10% 24VDC/110VDC/220VDC |
|
|
Motor |
Asynchronous motor |
|
|
Limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Auxiliary limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Torque switch |
Close/Open, each 1, SPDT,250VAC 10A |
Except AOX-Q-005/008/010 |
|
Travel |
90°±10° |
0°～270° |
|
Fail safe/ |
Internal-placed thermal protection, Open 120℃ ±5℃/Close 97℃ ± 5℃ |
|
|
Indicator |
Continuous position indicator |
|
|
Manual operate |
Declutching mechanism, operate by handwheel |
|
|
Self-locking device |
Self-locking by worm and worm gear |
|
|
Mechanical limit |
2 × external adjustable stopper |
|
|
Space heater |
30W(110V/220VAC) |
|
|
Conduit entry |
2 × PT 3/4” |
|
|
Ambient temperature |
-25℃～+70℃（-30℃、-40℃、-60℃ optional） |
|
|
Lubrication |
Grease moly（EP type） |
|
|
Material |
Steel, Aluminum alloy, Aluminum bronze,Polycarbonate |
|
|
Ambient humidity |
Max 90％RH |
Non-Condensing |
|
Anti-vibration |
X Y Z 10g,0.2～34 Hz,30 minutes |
|
|
External coating |
Dry powder, Epoxy polyester,high anti-corrosion |
|
|
No. |
Option scheme |
Remark |
|
1 |
Explosion-proof actuator（Exd ⅡCT5） |
AOX-Q series |
|
2 |
Potentiometer unit（1K-10K） |
AOX-Q series |
|
3 |
Proportion control unit (control signal 4-20mA DC/1-5V/1-10V) |
AOX-Q series |
|
4 |
Local control units (local control open/stop/close optional switch, local/remote switch) |
AOX-Q series |
|
5 |
Travel 120°, 180°,270° |
AOX-Q series |
|
6 |
Direct current motor(24VDC) |
AOX-Q series |
|
7 |
Water-proof actuator (IP68,10M,250HR) |
AOX-Q series |
|
8 |
Reverse electromagnetic control and transmission integrated motor starter |
AOX-Q series |
|
9 |
Torque switch (SPDT× 2 250VAC 10A) |
Except AOX-Q-005/008/010 |
|
10 |
Electric current position sensor (output 4-20mA DC) |
AOX-Q series |
|
11 |
High temperature resistance actuator (-10℃～+100℃) |
AOX-Q series |
|
12 |
Low temperature resistance actuator (-60℃～+30℃) |
AOX-Q series |
|
13 |
Low speed actuator |
AOX-Q series |
|
14 |
Bus-control unit |
AOX-Q series |
Before working
1. AOX-Q series part-turn electric actuator with handwheel and valves have been properly installed and connected.
2. The fixing screws, connecting parts and electrical connection parts of the location are tightened.
3. Grounding and equipotential bonding are properly implemented.
4. The electrical connection is correct.
5. The source supply voltage must always be on the nameplate and moving or moving parts.
6. AOX-Q series part-turn electric actuator with handwheel and valves are intact.
7. The ambient temperature is within the working limits of the electric actuator.
The operating conditions of the actuator are complex and varied, especially in the beach and sea platform environment, and the corrosion is very strong. In order to prevent corrosion and enhance the service life of the actuator, the actuators produced by our company are on land, beach and sea. All of them are tested for the appearance of waterproof performance. The professional test equipment is purchased and the AOX-Q series part-turn electric actuator with handwheel is strictly tested.
We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.
Q: How to order AOX-Q series part-turn electric actuator with handwheel?
A :Pease send us your purchase order by Email , or we can make you proforma invoice under your request.We need to know the following information for your order before sending you PI.
1) Product information Quantity, Specfcaton(Size, Material,Technological if needed and Packing requirements etc)
2) Delivery time required
3) Shipping information Company name, Street address,Phone &fax number, Destination seaport
4) Forwarders contact details if there's any in China.
Q: Can we call on skype?
A: Yes, we can. What's more, there are many optional ways we can talk easily, such as e-mail,Wechat, etc.
Q:Do you have stock of AOX-Q series part-turn electric actuator with handwheel?
A :Most of products are under regular production we can make delivery immediately if we the specific one in stock.