Modulating motorized quarter turn actuator
Product Description
Product Detail
Torque range：50~6000N.m
Switching time：22~185 S
Working time : S1 long time standard for both On-off and modulating type.
S2 standard, 30 min.
Material of Actuator Body: Aluminium Alloy
Display Mode: LCD, indication of opening(0-100%) and open/close fault
Control Mode: On-off signal control, Modulating (proportional regulation) control, Fieldbus Control etc.
Type of Modulating Signal: 0-10V, 2-10V, 4-20mA, etc.
1. Various output torque from 50Nm to 6000Nm.
2. Window of AOX-Q series modulating motorized quarter turn actuator:Polycarbonate window, built-in O-rings,fixed metal gland, the gland comes with two drainage channels to prevent water,easy to observe.
3. Torque switches of AOX-Q series modulating motorized quarter turn actuator (except for AOX-Q-005/008/010)
- Protect actuator from damage caused by overload from the driven valve over the whole travel.
- Once the torque switching acts, the actuator will be stopped immediately.
|
Model |
Max Output Torque |
60/50Hz Operating Time |
Max Drive Shaft Size |
Power |
Rated Current（A） |
Hand wheel Revolution |
Weight |
|||
|
single phase |
three phases |
|||||||||
|
N·M |
90° |
mm |
W |
110V |
220V |
380V |
440V |
N |
Kg |
|
|
AOX-Q-005 |
50 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
|
AOX-Q-008 |
80 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
|
AOX-Q-010 |
100 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
|
AOX-Q-015 |
150 |
21/25 |
Φ20 |
40 |
1.65/1.67 |
0.88/0.84 |
0.31/0.31 |
0.30/0.31 |
11 |
17.3 |
|
AOX-Q-020 |
200 |
21/25 |
Φ20 |
40 |
1.67/1.67 |
0.89/0.85 |
0.31/0.31 |
0.30/0.31 |
11 |
17.3 |
|
AOX-Q-030 |
300 |
26/31 |
Φ32 |
90 |
1.85/1.86 |
0.92/0.92 |
0.35/0.35 |
0.34/0.34 |
13.5 |
22 |
|
AOX-Q-050 |
500 |
26/31 |
Φ32 |
120 |
3.60/3.62 |
1.55/1.58 |
0.59/0.59 |
0.58/0.58 |
13.5 |
23 |
|
AOX-Q-060 |
600 |
26/31 |
Φ32 |
120 |
3.65/3.62 |
1.60/2.20 |
0.60/0.59 |
0.59/0.58 |
13.5 |
23 |
|
AOX-Q-080 |
800 |
31/37 |
Φ40 |
180 |
4.10/4.10 |
2.15/2.20 |
0.85/0.85 |
0.79/0.79 |
16.5 |
29 |
|
AOX-Q-120 |
1200 |
31/37 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
16.5 |
29 |
|
AOX-Q-150 |
1500 |
78/93 |
Φ40 |
120 |
3.65/3.62 |
1.60/2.20 |
0.60/0.59 |
0.59/0.58 |
40.5 |
77 |
|
AOX-Q-200 |
2000 |
93/112 |
Φ40 |
180 |
4.10/4.10 |
2.15/2.20 |
0.85/0.85 |
0.79/0.79 |
49.5 |
83 |
|
AOX-Q-300 |
3000 |
93/112 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
49.5 |
83 |
|
AOX-Q-400 |
4000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
|
AOX-Q-500 |
5000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
|
AOX-Q-600 |
6000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
|
Shell |
Enclosure :IP67,NEMA4, Exd II CT5 |
|
|
Power |
Standard:220VAC/1ph Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz, ±10% 24VDC/110VDC/220VDC |
|
|
Motor |
Asynchronous motor |
|
|
Limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Auxiliary limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Torque switch |
Close/Open, each 1, SPDT,250VAC 10A |
Except AOX-Q-005/008/010 |
|
Travel |
90°±10° |
0°～270° |
|
Fail safe/ |
Internal-placed thermal protection, Open 120℃ ±5℃/Close 97℃ ± 5℃ |
|
|
Indicator |
Continuous position indicator |
|
|
Manual operate |
Declutching mechanism, operate by handwheel |
|
|
Self-locking device |
Self-locking by worm and worm gear |
|
|
Mechanical limit |
2 × external adjustable stopper |
|
|
Space heater |
30W(110V/220VAC) |
|
|
Conduit entry |
2 × PT 3/4” |
|
|
Ambient temperature |
-25℃～+70℃（-30℃、-40℃、-60℃ optional） |
|
|
Lubrication |
Grease moly（EP type） |
|
|
Material |
Steel, Aluminum alloy, Aluminum bronze,Polycarbonate |
|
|
Ambient humidity |
Max 90％RH |
Non-Condensing |
|
Anti-vibration |
X Y Z 10g,0.2～34 Hz,30 minutes |
|
|
External coating |
Dry powder, Epoxy polyester,high anti-corrosion |
|
|
No. |
Option scheme |
Remark |
|
1 |
Explosion-proof actuator（Exd ⅡCT5） |
AOX-Q series |
|
2 |
Potentiometer unit（1K-10K） |
AOX-Q series |
|
3 |
Proportion control unit (control signal 4-20mA DC/1-5V/1-10V) |
AOX-Q series |
|
4 |
Local control units (local control open/stop/close optional switch, local/remote switch) |
AOX-Q series |
|
5 |
Travel 120°, 180°,270° |
AOX-Q series |
|
6 |
Direct current motor(24VDC) |
AOX-Q series |
|
7 |
Water-proof actuator (IP68,10M,250HR) |
AOX-Q series |
|
8 |
Reverse electromagnetic control and transmission integrated motor starter |
AOX-Q series |
|
9 |
Torque switch (SPDT× 2 250VAC 10A) |
Except AOX-Q-005/008 /010 |
|
10 |
Electric current position sensor (output 4-20mA DC) |
AOX-Q series |
|
11 |
High temperature resistance actuator (-10℃～+100℃) |
AOX-Q series |
|
12 |
Low temperature resistance actuator (-60℃～+30℃) |
AOX-Q series |
|
13 |
Low speed actuator |
AOX-Q series |
|
14 |
Bus-control unit |
AOX-Q series |
Our company has been engaged in the manufacture of AOX-Q series modulating motorized quarter turn actuator for more than 20 years.The main processing equipment includes machining center, CNC lathe, CNC milling machine, CNC drilling machine, CNC drilling machine, AOX sustained investment in high-level equipment enables the strict control on manufacturing process, which assures good quality.
Installation, maintenance and storage of AOX-Q series modulating motorized quarter turn actuator
1 There should be no loose clearance at all joints of the actuator and the adjustment mechanism to ensure good adjustment effect, and the connection bolt should be evenly and symmetrically tightened during installation.
2 The electrical installation of the electric actuator shall be carried out according to the relevant construction requirements of the electrical installation, and the explosion-proof products shall be carried out in accordance with the requirements of the “Installation Specifications for Electrical Equipment in Explosive Hazardous Locations”.
3 Electric actuators should be maintained frequently. For places with high vibration, always check whether the fasteners are loose, whether the connectors are in good contact and whether the locking is reliable.
Q:Can we as your agent?
A:Yes,We have many agent in all over the world,Contact us for further details.
Q: Can your factory print our brand on the AOX-Q series modulating motorized quarter turn actuator ( or package ) ?
A:Our factory can laser print customer’s logo on the product with the permission from customers.We need an authorization letter from you to allow us to print your logo on it .
Q:How do you make a quick respnse to customer’s inquiry?
A:Our professional team will reply you online or by email,skype and phone.