Modulating motorized linear actuator
Product Description
Product Detail
Ambient temperature:-25 °C +70 °C
Corrosion level: Epoxy powder coating. NEMA 4X corrosion protection
Motor Specifications:Class F, with thermal protector up to +135 °C (+275 °F)
Working System
On-off Type: S2 - 15 min, no more than 600 times per hour start
Modulating Type: S4 - 50 %, up to 600 triggers per hour
On/off type signal:
Input : AC 110/220 Input
Signal Feedback:Integrated fault contacts,Close the valve contact,Open the valve contact
Self-locking with minimum backlash
Space heater with thermostat to prevent overheating
Wide range of applications and control systems
Compact internal arrangements
Hand/auto clutch switching
Remote control setting
Self-diagnosis fault alarm
Modular design
1. Terminal block of AOX-L series modulating motorized linear actuator
Installed in a separate wiring chamber, using the spring self - type terminal ensure robust and reliable.
2. The display of valve position
During the opening or closing movement of actuator, the change of valve position is real-time display on the LCD screen with large numbers.
3. Installation for AOX-L series modulating motorized linear actuator
The bottom of the installation size consistent with the valve standards, if valve installation size does not match, then need to be designed.
|
Model |
Thrust |
Speed |
Max travel |
power |
Rated current(A) |
Weight |
|
N |
mm/S |
mm |
W |
220V/50HZ/1PH |
Kg |
|
|
AOX-L-30 |
3000 |
1.5 |
25 |
30 |
0.31 |
17.5 |
|
AOX-L-50 |
5000 |
1.5 |
40 |
45 |
0.42 |
19 |
|
AOX-L-80 |
8000 |
1.5 |
60 |
60 |
0.62 |
19.5 |
|
AOX-L-100 |
10000 |
1.5 |
100 |
60 |
0.68 |
33 |
|
AOX-L-160 |
16000 |
1.5 |
100 |
90 |
0.85 |
33 |
|
AOX-L-200 |
20000 |
1.5 |
100 |
90 |
0.87 |
33 |
|
AOX-L-250 |
25000 |
1.5 |
100 |
120 |
1.22 |
33 |
|
AOX-L-300 |
30000 |
1.5 |
100 |
120 |
1.28 |
33 |
|
Shell |
Enclosure :IP67,NEMA4 and 6 |
|
|
|
Standard:220VAC/1ph Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz |
|
|
Motor |
Asynchronous motor |
|
|
Limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Auxiliary limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
External coating |
Dry powder, Epoxy polyester,high anti-corrosion |
|
|
Fail safe/ |
Internal-placed thermal protection, Open 115℃ ±5℃/Close 97℃ ± 5℃ |
|
|
Indicator |
Continuous position indicator |
|
|
Manual operate |
Declutching mechanism, operate by handwheel |
|
|
Self-locking device |
Self-locking by worm and worm gear |
|
|
Mechanical limit |
2 × external adjustable stopper |
|
|
Space heater |
30W(110V/220VAC) |
|
|
Conduit entry |
2 × M18*1.5 |
|
|
Ambient temperature |
-30℃～+70℃ |
|
|
Lubrication |
Grease moly（EP type） |
|
|
Material |
Steel, Aluminum alloy, Aluminum bronze,Polycarbonate |
|
|
Ambient humidity |
Max 90％RH |
Non-Condensing |
|
Anti-vibration |
X Y Z 10g,0.2～34 Hz,30 minutes |
|
|
No. |
Option scheme |
Remark |
|
1 |
Potentiometer unit（1K-10K） |
AOX-L series |
|
2 |
Proportion control unit (control signal 4-20mA DC/1-5V/1-10V) |
AOX-L series |
|
3 |
Local control units (local control open/stop/close optional switch, local/remote switch) |
AOX-L series |
|
4 |
Water-proof actuator (IP68,10M,250HR) |
AOX-L series |
|
5 |
Reverse electromagnetic control and transmission integrated motor starter |
AOX-L series |
|
6 |
Electric current position sensor (output 4-20mA DC) |
AOX-L series |
|
7 |
High temperature resistance actuator (-10℃～+100℃) |
AOX-L series |
|
8 |
Low temperature resistance actuator (-40℃～+70℃) |
AOX-L series |
|
9 |
Low speed actuator |
AOX-L series |
|
10 |
Bus Control Unit |
AOX-L series |
Installation, maintenance and storage
1. There should be no loose clearance at all joints of the AOX-L series modulating motorized linear actuator and the adjustment mechanism to ensure good adjustment effect, and the connection bolt should be evenly and symmetrically tightened during installation.
2. The electrical installation of the AOX-L series modulating motorized linear actuator shall be carried out according to the relevant construction requirements of the electrical installation, and the explosion-proof products shall be carried out in accordance with the requirements of the “Installation Specifications for Electrical Equipment in Explosive Hazardous Locations”.
3. Pay attention to the handling during transportation, and use the forklift to load and unload according to the weight of the actuator mechanism model to avoid impact and damage the quality of the product.
We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.
Q:How to control quality of AOX-L series modulating motorized linear actuator?
A :1, all the raw materials by IQC( Incoming Quality Control) before launch whole process into the process after the screening.
2, process each link in the process of IPQ(Input process quality control ) patrol inspection.
3, after finished by QC full inspection before packing into the next proceess packing.
Q: I Want to buy about 100 pieces AOX-L series modulating motorized linear actuator, but firist I want to try one. What do you think of my request?
A: Welcome sample order.No need to worry about the small quantity.
Q: How long can I expect to get the sample?
A :The samples will be ready for delivery in 3-5 days The samples will be sent va international express such as DHL ,UPS ,TNT, FEDEX and would be arrived within 3-5 days.