Modulating linear electric actuator
Product Description
Product Detail
Motor specification: Class F, with thermal protector up to 135°C
Force range:2000 - 30000 N
Running speeds: 0.33 mm/s - 1 mm/s
Ingress Protection:2* NPT 3/4
Electrical interface:IP67, Optional:IP68
Modulating type signal:
Input signal: 4 - 20 mA; 0 - 10 V; 2 - 10 V
Output signal: 4 - 20 mA; 0 - 10 V; 2 - 10 V
Loss Signal Mode Setting:N/A
Dead Zone:≤2%
Time Lag:N/A
Related humidity: <90%(25°C)
Handwheel operated manually
Forced Switch/Limit Switch
Space heater with thermostat to prevent overheating
Provide a wide range of voltage
Hand/auto clutch switching
Local control/auto hold
1. Shell
The shell of AOX-QL series modulating linear electric actuator is made of aluminum alloy, with anodic oxidation treatment and polyester powder coating. It is strong corrosion-resistant and enclosure IP67,NEMA 4 and 6, IP68 and explosion-proof is optional.
2. Motor of AOX-QL series modulating linear electric actuator
Asynchronous motor, small, large torque, and small inertia force, F-class insulation rating, with thermal protection to avoid damaging.
3. Manual Structure
The design of handwheel is safe, reliable, labor-saving, small. Declutch to operate by handwheel if without power, and reset automatically when power on.
|
Model |
Thrust |
Speed |
Max travel |
power |
Rated current(A) 50HZ |
Weight |
|||
|
Single-phase |
Three-phase |
||||||||
|
N |
mm/S |
mm |
W |
110V |
220V |
380V |
440V |
Kg |
|
|
AOX-QL-20 |
2000 |
0.66 |
60 |
20 |
1.10/0.95 |
0.55/0.54 |
0.30/0.30 |
N/A |
18 |
|
AOX-QL-30 |
3000 |
0.66 |
60 |
20 |
1.10/0.95 |
0.55/0.54 |
0.30/0.30 |
N/A |
18 |
|
AOX-QL-50 |
5000 |
0.66 |
60 |
20 |
1.10/0.95 |
0.55/0.54 |
0.30/0.30 |
N/A |
18 |
|
AOX-QL-80 |
8000 |
0.33 |
60 |
20 |
1.10/0.95 |
0.55/0.54 |
0.30/0.30 |
N/A |
18 |
|
AOX-QL-100 |
10000 |
0.50 |
60 |
40 |
1.65/1.67 |
0.88/0.84 |
0.31/0.31 |
0.30/0.31 |
30 |
|
AOX-QL-160 |
16000 |
0.50 |
100 |
40 |
1.67/1.67 |
0.89/0.85 |
0.31/0.31 |
0.30/0.31 |
32 |
|
AOX-QL-200 |
20000 |
0.44 |
100 |
90 |
1.85/1.86 |
0.92/0.92 |
0.35/0.35 |
0.34/0.34 |
33 |
|
AOX-QL-250 |
25000 |
0.44 |
100 |
90 |
3.60/3.62 |
1.55/1.58 |
0.59/0.59 |
0.58/0.58 |
34 |
|
AOX-QL-300 |
30000 |
0.44 |
100 |
90 |
3.65/3.62 |
1.60/2.20 |
0.60/0.59 |
0.59/0.59 |
35 |
|
Shell |
Enclosure :IP67,NEMA4, Exd II CT5 |
|
|
|
Standard:220VAC/1ph Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz, ±10% 24VDC/110VDC/220VDC |
|
|
Motor |
Asynchronous motor |
|
|
Limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Auxiliary limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Torque switch |
Close/Open, each 1, SPDT,250VAC 10A |
Except AOX-QL-20/30/50/80 |
|
Fail safe/ |
Internal-placed thermal protection, Open 115℃ ±5℃/Close 97℃ ± 5℃ |
|
|
Indicator |
Continuous position indicator |
|
|
Manual operate |
Declutching mechanism, operate by handwheel |
|
|
Self-locking device |
Self-locking by worm and worm gear |
|
|
Space heater |
30W(110V/220VAC) |
|
|
Conduit entry |
2 × PF 3/4” |
|
|
Ambient temperature |
-30℃～+70℃ |
|
|
Lubrication |
Grease moly（EP type） |
|
|
Material |
Steel, Aluminum alloy, Aluminum bronze,Polycarbonate |
|
|
Ambient humidity |
Max 90％RH |
Non-Condensing |
|
Anti-vibration |
X Y Z 10g,0.2～34 Hz,30 minutes |
|
|
External coating |
Dry powder, Epoxy polyester,high anti-corrosion |
|
|
No. |
Option scheme |
Remark |
|
1 |
Explosion-proof actuator（Exd ⅡCT5） |
AOX-QL series |
|
2 |
Potentiometer unit（1K-10K） |
AOX-QL series |
|
3 |
Proportion control unit (control signal 4-20mA DC/1-5V/1-10V) |
AOX-QL series |
|
4 |
Local control units (local control open/stop/close optional switch, local/remote switch) |
AOX-QL series |
|
5 |
Direct current motor(24VDC) |
AOX-QL series |
|
6 |
Water-proof actuator (IP68,10M,250HR) |
AOX-QL series |
|
7 |
Reverse electromagnetic control and transmission integrated motor starter |
AOX-QL series |
|
8 |
Torque switch (SPDT× 2 250VAC 10A) |
Except AOX-QL-20/30/50/80 |
|
9 |
Electric current position sensor (output 4-20mA DC) |
AOX-QL series |
|
10 |
High temperature resistance actuator (-10℃～+100℃) |
AOX-QL series |
|
11 |
Low temperature resistance actuator (-40℃～+70℃) |
AOX-QL series |
|
12 |
Bus Control Unit |
AOX-QL series |
Before working
1. Actuators and valves have been properly installed and connected.
2. The fixing screws, connecting parts and electrical connection parts of the location are tightened.
3. Grounding and equipotential bonding are properly implemented.
4. The electrical connection is correct.
5. The source supply voltage must always be on the nameplate and moving or moving parts.
6. Electric actuators and valves are intact.
7. The ambient temperature is within the working limits of the electric actuator.
In order to better display the company's products and enhance the company's popularity, our company actively participates in major exhibitions at home and abroad, in Germany VALVE WORLD, AHEMA, Russia PCV Expo, ECWATCH, Malaysia ASIA WATER, Thailand THAIWATER, Indonesia Indowater, Shanghai Flowtech, etc.You all can see us at these exhibitions.
We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.
Q : How long is the sample time of the slipper?
A :The regular AOX-QL series modulating linear electric actuator we all have in stock, if it is specially customized it takes about 3-5 days.
Q: What payment methods your company accept?
A: We accept most of the payment methods,but maily accept T/T,L/C,Western Union.
Q:Do you have any certificate for your AOX-QL series modulating linear electric actuator?
A:Now we have got CE,ATEX,GOST,SIL,EAC certificate for our products.