Manual override multi turn electric actuator
Product Description
Product Detail
Torque Range: 40 - 1000 Nm Direct Output
Speed: 34 35 45 67 70 90 (rpm)
Noise Level: Less than 75 dB within 1 m
Ingress Protection: IP67 , Optional:IP68
Connection size:ISO5210(Thrust torque type)and JB2920(Three claw type)
Applicable Voltage:3 phase: AC 380 V (±10 %) /50/60 Hz (±5 %)
optional: 1 phase AC 220 V
Loss Signal Mode Setting:N/A
Dead Zone:≤2%
Time Lag:N/A
Phase sequence self-correction
Limit and torque sensing
Absolute encoder precision detection valve position
Conditional control protection
Precisely machined gearing system & oil lubrication
Integrated local control unit
1. Integrated Local control
Local control switches and locking type selector switch local/stop/remote are magnetic switches, controlled by magnetic reed, thus assure the damp proof sealing inside of the actuator.
2. Manual operation for AOX-M series manual override multi turn electric actuator
- In the commissioning or in an emergency the actuator can be operated by handwheel.
- By operating the red button to disconnected the actuator and motor and start manual operation.Because the self-locking worm gear between the motor and the operating shaft are separated, it’s very easy to turn to manual operation even if the actuator is running at maximum torque.
- After starting the motor, automatically breaks away from manual operation, when the motor is operating the hand wheel does not work.
3. Motor of AOX-M series manual override multi turn electric actuator
Specially designed high starting torque motor, can frequent open the valve from fully closed position. In addition to the three-phase AC motors, single-phase AC are also suitable for AOX-M series actuators.
|
Model |
Output torque |
Speed |
Maxshaft diameter |
Power |
Rated current（A）50HZ |
Flange |
Weight |
|
three phases |
|||||||
|
N·m |
RPM |
mm |
W |
380V |
ISO5210 |
Kg |
|
|
AOX-M-007 |
70 |
45 |
Φ28 |
400 |
2.42 |
F10 |
32 |
|
70 |
90 |
400 |
2.95 |
||||
|
AOX-M-010 |
120 |
35 |
Φ28 |
600 |
2.25 |
F10 |
38 |
|
120 |
70 |
600 |
3.18 |
||||
|
120 |
105 |
800 |
5.15 |
||||
|
AOX-M-020 |
300 |
34 |
Φ40 |
1100 |
4.50 |
F14 |
68 |
|
300 |
67 |
1100 |
6.85 |
||||
|
AOX-M-050 |
450 |
34 |
Φ40 |
1100 |
9.58 |
F14 |
70 |
|
450 |
67 |
1500 |
14.80 |
||||
|
AOX-M-060 |
600 |
34 |
Φ55 |
3000 |
10.89 |
F16 |
103 |
|
600 |
67 |
4000 |
16.50 |
||||
|
AOX-M-080 |
800 |
34 |
Φ55 |
3000 |
12.43 |
F16 |
103 |
|
800 |
67 |
4000 |
23.50 |
||||
|
AOX-M-100 |
1000 |
34 |
Φ55 |
4000 |
30.20 |
F16 |
103 |
|
Shell |
Enclosure:IP67（IP68 optional）,NEMA4 and 6 |
|
|
Power |
Standard：380V AC/3ph Optional：110/220V AC/1ph,440V AC/3ph, 50/60Hz, ±10% |
|
|
Motor |
Asynchronous motor |
|
|
Limit switch |
1×Open/ Close, SPDT,250V AC 10A（on/off model） |
|
|
Auxiliary limit switch |
1×Open/ Close, SPDT,250V AC 10A（on/off model） |
|
|
Torque switch |
1×Open/ Close, SPDT,250V AC 10A |
|
|
Operating temperature |
Internal-placed thermal protection，Open 120℃ ±5℃ /Close 97℃ ±5℃ |
|
|
Manual operation |
Declutching mechanism,with handwheel operation |
|
|
Self-locking device |
Self-locking by worm and worm gear |
|
|
Space heater |
30W (110/220V AC) Condensation preventing (according to conditions, can be adjusted) |
|
|
Conduit entry |
Double seal 3×（PT3/4”、PT1”、PT1-1/2”optional） |
|
|
Ambient temperature |
-25℃～+70℃（-30℃、-40℃、-60℃ optional） |
|
|
Lubrication |
Special oil for 00 actuators |
|
|
Material |
Ductile iron, high-strength aluminum alloys, steel, aluminum bronze, polycarbonate |
|
|
Ambient humidity |
Max 90％RH |
Non-Condensing |
|
Anti-vibration |
X Y Z 10g,0.2～34 Hz,30 minutes |
|
|
External coating |
Dry powder, epoxy polyester,high anti-corrosion |
|
|
Overload protection |
Torque peak overload protection |
|
|
Display screen |
LED display (smart regulation type) |
|
|
Setting mode |
Non-intrusive setting (without opening the cover set type) |
|
|
Electrically |
Integrated control unit with a non-invasive rotary switch |
|
|
NO. |
Option cheme |
Optional |
|
1 |
Explosion-proof actuator (Exd Ⅱ CT4) |
AOX-M series |
|
2 |
Water-proof actuator (IP68,10M,250HR) |
AOX-M series |
|
3 |
High temperature resistance actuator (-10℃~+100℃) |
AOX-M series |
|
4 |
Low temperature resistance actuator (-60℃～+30℃) |
AOX-M series |
|
5 |
Special output drive |
AOX-M series |
Installation, maintenance and storage
1. There should be no loose clearance at all joints of the AOX-M series manual override multi turn electric actuator and the adjustment mechanism to ensure good adjustment effect, and the connection bolt should be evenly and symmetrically tightened during installation.
2. Pay attention to the handling during transportation, and use the forklift to load and unload according to the weight of the AOX-M series manual override multi turn electric actuator mechanism model to avoid impact and damage the quality of the product.
3. It should be stored in a dry and ventilated room. To prevent moisture intrusion from the ground, it should be placed on the shelf or separated by wooden boards.
In order to better display the company's AOX-M series manual override multi turn electric actuator and enhance the company's popularity, our company actively participates in major exhibitions at home and abroad, in Germany VALVE WORLD, AHEMA, Russia PCV Expo, ECWATCH, Malaysia ASIA WATER, Thailand THAIWATER, Indonesia Indowater, Shanghai Flowtech, etc.You all can see us at these exhibitions.
We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.
Q: If I'm interested in your AOX-M series manual override multi turn electric actuator when I can receive your quotation and detail information after send the inquiry?
A:All your inquiry will be replied in 24hours.
Q: Do you give any discount for AOX-M series manual override multi turn electric actuator?
A:I'll surely try my best to help you get those by the best price and good service at the same time.
Q:Can you send me more detail information about the actuator?
A:Yes,you can send me mail about your inquiry and I’ll send you he detal information you need.