Product Description

AOX-Q series local remote control rotary electric actuator is specially designed for quarter turn operating applications such as ball, butterfly, plug valves and similar usages.Our actuators can be customized according to the special requirements of customers. Based on a wide range of products including high performance multi turn, partl turn,and linear actuators, we offer automated solutions for all valve types, ranging from ball valves to dampers.

Product Detail

 Features

1.   Various output torque from 50Nm to 6000Nm.

2.   Sealing:By O-ring in all interfaces IP67(standard), and double o-ring for IP68 (option).

3.   Motor for AOX-Q series local remote control rotary electric actuator:Specially designed induction motor to generate high starting torque and high efficiency equipped with thermal protector to prevent damage from over heating.

4.   Modular design: The AOX-Q series local remote control rotary electric actuator have always focused on the modular design of the products. The diversified components ensure that the products can be assembled according to customer requirements and offer a variety of customized products. The gold-traveled connector interface between the various components of the AOX-Q series local remote control rotary electric actuator is simple and practical for product maintenance. The intelligent module adopts a control board with a high integration and low power consumption of a single-chip microcomputer and an analog circuit.


Performance Parmeter

Model

Max Output Torque

60/50Hz

Operating Time

Max Drive Shaft Size

Power

Rated Current(A)

Hand

wheel Revolution

Weight

single phase

three phases

N·M

90°

mm

W

110V

220V

380V

440V

N

Kg

AOX-Q-005

50

18/22

Φ20

20

1.10/0.95

0.55/0.54

0.3/0.3

N/A

10

7.5

AOX-Q-008

80

18/22

Φ20

20

1.10/0.95

0.55/0.54

0.3/0.3

N/A

10

7.5

AOX-Q-010

100

18/22

Φ20

20

1.10/0.95

0.55/0.54

0.3/0.3

N/A

10

7.5

AOX-Q-015

150

21/25

Φ20

40

1.65/1.67

0.88/0.84

0.31/0.31

0.30/0.31

11

17.3

AOX-Q-020

200

21/25

Φ20

40

1.67/1.67

0.89/0.85

0.31/0.31

0.30/0.31

11

17.3

AOX-Q-030

300

26/31

Φ32

90

1.85/1.86

0.92/0.92

0.35/0.35

0.34/0.34

13.5

22

AOX-Q-050

500

26/31

Φ32

120

3.60/3.62

1.55/1.58

0.59/0.59

0.58/0.58

13.5

23

AOX-Q-060

600

26/31

Φ32

120

3.65/3.62

1.60/2.20

0.60/0.59

0.59/0.58

13.5

23

AOX-Q-080

800

31/37

Φ40

180

4.10/4.10

2.15/2.20

0.85/0.85

0.79/0.79

16.5

29

AOX-Q-120

1200

31/37

Φ40

180

4.20/4.10

2.35/2.30

0.87/0.87

0.81/0.81

16.5

29

AOX-Q-150

1500

78/93

Φ40

120

3.65/3.62

1.60/2.20

0.60/0.59

0.59/0.58

40.5

77

AOX-Q-200

2000

93/112

Φ40

180

4.10/4.10

2.15/2.20

0.85/0.85

0.79/0.79

49.5

83

AOX-Q-300

3000

93/112

Φ40

180

4.20/4.10

2.35/2.30

0.87/0.87

0.81/0.81

49.5

83

AOX-Q-400

4000

155/185

Φ40

180

4.20/4.10

2.35/2.30

0.87/0.87

0.81/0.81

82.5

83

AOX-Q-500

5000

155/185

Φ40

180

4.20/4.10

2.35/2.30

0.87/0.87

0.81/0.81

82.5

83

AOX-Q-600

6000

155/185

Φ40

180

4.20/4.10

2.35/2.30

0.87/0.87

0.81/0.81

82.5

83

Standard Specification

Shell

Enclosure :IP67,NEMA4, Exd II CT5

Power

Standard:220VAC/1ph

Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz, ±10%

24VDC/110VDC/220VDC

Motor

Asynchronous motor

Limit switch

2×Open/ Close, SPDT,250VAC 10A

Auxiliary limit switch

2×Open/ Close, SPDT,250VAC 10A

Torque switch

Close/Open, each 1, SPDT,250VAC 10A

Except AOX-Q-005/008/010

Travel

90°±10°

0°~270°

Fail safe/
Operating temperature

Internal-placed thermal protection, Open 120℃ ±5℃/Close 97℃ ± 5℃

Indicator

Continuous position indicator

Manual operate

Declutching mechanism, operate by handwheel

Self-locking device

Self-locking by worm and worm gear

Mechanical limit

2 × external adjustable stopper

Space heater

30W(110V/220VAC)

Conduit entry

2 × PT 3/4”

Ambient temperature

-25℃~+70℃(-30℃、-40℃、-60℃ optional)

Lubrication

Grease moly(EP type)

Material

Steel, Aluminum alloy, Aluminum bronze,Polycarbonate

Ambient humidity

Max 90%RH

Non-Condensing

Anti-vibration

X Y Z 10g,0.2~34 Hz,30 minutes

External coating

Dry powder, Epoxy polyester,high anti-corrosion


Option Specification

No.

Option scheme

Remark

1

Explosion-proof actuator(Exd ⅡCT5)

AOX-Q series

2

Potentiometer unit(1K-10K)

AOX-Q series

3

Proportion control unit (control signal 4-20mA DC/1-5V/1-10V)

AOX-Q series

4

Local control units (local control open/stop/close optional switch, local/remote switch)

AOX-Q series

5

Travel 120°, 180°,270°

AOX-Q series

6

Direct current motor(24VDC)

AOX-Q series

7

Water-proof actuator (IP68,10M,250HR)

AOX-Q series

8

Reverse electromagnetic control and transmission integrated motor starter

AOX-Q series

9

Torque switch (SPDT× 2  250VAC 10A)

Except AOX-Q-005/008/010

10

Electric current position sensor (output 4-20mA DC)

AOX-Q series

11

High temperature resistance actuator (-10℃~+100℃)

AOX-Q series

12

Low temperature resistance actuator (-60℃~+30℃)

AOX-Q series

13

Low speed actuator

AOX-Q series

14

Bus-control unit

AOX-Q series

Instruction

Installation, maintenance and storage

1. There should be no loose clearance at all joints of the actuator and the adjustment mechanism to ensure good adjustment effect, and the connection bolt should be evenly and symmetrically tightened during installation.

2. Before using the AOX-Q series local remote control rotary electric actuator, carefully read the instruction manual and check and verify according to the specified inspection method. Before the electric actuator is put into operation, check whether the power supply voltage at the site is in accordance with the regulations. At the same time, check the wiring according to the specified electrical installation wiring diagram. Pay attention to the wire number when wiring, and the wiring of each terminal should be firm.

3. AOX-Q series local remote control rotary electric actuator should be maintained frequently. For places with high vibration, always check whether the fasteners are loose, whether the connectors are in good contact and whether the locking is reliable.

Application Field




Manufaturing process

Our Patents

AOX attaches great importance to product design, and the design team has strong ability of product design and innovation. AOX has complete intellectual property rights and many technical patents. We value domestically developed products, respect intellectual property, AOX team totally received 98 utility patents, and we will keeping on innovate and carry out supreme quality standard for our AOX-Q series local remote control rotary electric actuator.

Our Certificate

Transportation

FAQ

We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.


Q:How to control quality of AOX-Q series local remote control rotary electric actuator?

A :1, all the raw materials by IQC( Incoming Quality Control) before launch whole process into the process after the screening.

2, process each link in the process of IPQ(Input process quality control ) patrol inspection.

3, after finished by QC full inspection before packing into the next proceess packing.


Q: What payment methods your company accept?

A: We accept most of the payment methods,but maily accept T/T,L/C,Western Union.


Q: If I'm interested in your AOX-Q series local remote control rotary electric actuator when I can receive your quotation and detail information after send the inquiry?

A:All your inquiry will be replied in 24hours.

Products Categorys

Featured Products

Navigation