Local remote control linear electric actuator
Product Description
Product Detail
Force range:2000 - 30000 N
Running speeds: 0.33 mm/s - 1 mm/s
Ambient temperature:-25 °C +70 °C
Corrosion level: Epoxy powder coating. NEMA 4X corrosion protection
Anti-vibration level:JB/T 8219
Noise level:Less than 75 dB within 1 m
Ingress Protection:2* NPT 3/4
Electrical interface:IP67, Optional:IP68
Explosion proof mark: EX d II CT5
Motor Specifications:Class F, with thermal protector up to +135 °C (+275 °F)
High corrosion resistance
Self-locking with minimum backlash
Strong design structure, O ring system for water proof
Handwheel operated manually
Forced Switch/Limit Switch
Space heater with thermostat to prevent overheating
Provide a wide range of voltage
1. Manual Structure
The design of AOX-QL series local remote control linear electric actuator handwheel is safe, reliable, labor-saving, small. Declutch to operate by handwheel if without power, and reset automatically when power on.
2. Limit switch for AOX-QL series local remote control linear electric actuator
Mechanical, electronic double limit. Mechanical limit stopper is adjustable, safe and reliable; electronic limit switch is controlled by cam. Set position accurately and conveniently.
3. Anti-off bolt
The bolt attaches to the shell and be not off when remove the shell.
|
Model |
Thrust |
Speed |
Max travel |
power |
Rated current(A) 50HZ |
Weight |
|||
|
Single-phase |
Three-phase |
||||||||
|
N |
mm/S |
mm |
W |
110V |
220V |
380V |
440V |
Kg |
|
|
AOX-QL-20 |
2000 |
0.66 |
60 |
20 |
1.10/0.95 |
0.55/0.54 |
0.30/0.30 |
N/A |
18 |
|
AOX-QL-30 |
3000 |
0.66 |
60 |
20 |
1.10/0.95 |
0.55/0.54 |
0.30/0.30 |
N/A |
18 |
|
AOX-QL-50 |
5000 |
0.66 |
60 |
20 |
1.10/0.95 |
0.55/0.54 |
0.30/0.30 |
N/A |
18 |
|
AOX-QL-80 |
8000 |
0.33 |
60 |
20 |
1.10/0.95 |
0.55/0.54 |
0.30/0.30 |
N/A |
18 |
|
AOX-QL-100 |
10000 |
0.50 |
60 |
40 |
1.65/1.67 |
0.88/0.84 |
0.31/0.31 |
0.30/0.31 |
30 |
|
AOX-QL-160 |
16000 |
0.50 |
100 |
40 |
1.67/1.67 |
0.89/0.85 |
0.31/0.31 |
0.30/0.31 |
32 |
|
AOX-QL-200 |
20000 |
0.44 |
100 |
90 |
1.85/1.86 |
0.92/0.92 |
0.35/0.35 |
0.34/0.34 |
33 |
|
AOX-QL-250 |
25000 |
0.44 |
100 |
90 |
3.60/3.62 |
1.55/1.58 |
0.59/0.59 |
0.58/0.58 |
34 |
|
AOX-QL-300 |
30000 |
0.44 |
100 |
90 |
3.65/3.62 |
1.60/2.20 |
0.60/0.59 |
0.59/0.59 |
35 |
|
Shell |
Enclosure :IP67,NEMA4, Exd II CT5 |
|
|
|
Standard:220VAC/1ph Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz, ±10% 24VDC/110VDC/220VDC |
|
|
Motor |
Asynchronous motor |
|
|
Limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Auxiliary limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Torque switch |
Close/Open, each 1, SPDT,250VAC 10A |
Except AOX-QL-20/30/50/80 |
|
Fail safe/ |
Internal-placed thermal protection, Open 115℃ ±5℃/Close 97℃ ± 5℃ |
|
|
Indicator |
Continuous position indicator |
|
|
Manual operate |
Declutching mechanism, operate by handwheel |
|
|
Self-locking device |
Self-locking by worm and worm gear |
|
|
Space heater |
30W(110V/220VAC) |
|
|
Conduit entry |
2 × PF 3/4” |
|
|
Ambient temperature |
-30℃～+70℃ |
|
|
Lubrication |
Grease moly（EP type） |
|
|
Material |
Steel, Aluminum alloy, Aluminum bronze,Polycarbonate |
|
|
Ambient humidity |
Max 90％RH |
Non-Condensing |
|
Anti-vibration |
X Y Z 10g,0.2～34 Hz,30 minutes |
|
|
External coating |
Dry powder, Epoxy polyester,high anti-corrosion |
|
|
No. |
Option scheme |
Remark |
|
1 |
Explosion-proof actuator（Exd ⅡCT5） |
AOX-QL series |
|
2 |
Potentiometer unit（1K-10K） |
AOX-QL series |
|
3 |
Proportion control unit (control signal 4-20mA DC/1-5V/1-10V) |
AOX-QL series |
|
4 |
Local control units (local control open/stop/close optional switch, local/remote switch) |
AOX-QL series |
|
5 |
Direct current motor(24VDC) |
AOX-QL series |
|
6 |
Water-proof actuator (IP68,10M,250HR) |
AOX-QL series |
|
7 |
Reverse electromagnetic control and transmission integrated motor starter |
AOX-QL series |
|
8 |
Torque switch (SPDT× 2 250VAC 10A) |
Except AOX-QL-20/30/50/80 |
|
9 |
Electric current position sensor (output 4-20mA DC) |
AOX-QL series |
|
10 |
High temperature resistance actuator (-10℃～+100℃) |
AOX-QL series |
|
11 |
Low temperature resistance actuator (-40℃～+70℃) |
AOX-QL series |
|
12 |
Bus Control Unit |
AOX-QL series |
Since 1997, the company has set up a technology R&D center, invested a lot of resources in R&D innovation, introduced high-tech talents, cooperation between colleges and research institutes, advanced equipment introduction, etc.
With the value placed on domestically developed products and respect for intellectual property, R&D team of AOX has totally obtained 96 national patents. To maintain our status as leader of this industry. we will continue to focus on innovation and implement highest quality standards and lead the high quality AOX-QL series local remote control linear electric actuator.
Our company has obtained various domestic and foreign certifications such as IS09001, ISO14001, CE, ATEX, GOST, EAC, SIL3, IP68, CU-TR, explosion-proof, etc., which fully demonstrates that our products fully comply with international standards, and the quality of AOX-QL series local remote control linear electric actuator is guaranteed.
We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.
Q:How to control quality of AOX-QL series local remote control linear electric actuator?
A :1, all the raw materials by IQC( Incoming Quality Control) before launch whole process into the process after the screening.
2, process each link in the process of IPQ(Input process quality control ) patrol inspection.
3, after finished by QC full inspection before packing into the next proceess packing.
Q: Are you able to customize the enclosure designs suiting our needs?
A: We've always tried to provide our buyers with customized services, if technically and resonable cost allowed.
Q:How's the delivery of AOX-QL series local remote control linear electric actuator?
Because I really need them is urgently?
A:For sample order 3~7days will be no problem.And for regular order we promise in 15 days.