Local control linear electric actuator
Product Description
Product Detail
Force range:2000 - 30000 N
On/off type signal:
Input : AC 110/220 Input
Signal Feedback:Integrated fault contacts,Close the valve contact,Open the valve contact
Modulating type signal:
Input signal: 4 - 20 mA; 0 - 10 V; 2 - 10 V
Output signal: 4 - 20 mA; 0 - 10 V; 2 - 10 V
Loss Signal Mode Setting:N/A
Dead Zone:≤2%
Time Lag:N/A
Related humidity: <90%(25°C)
High corrosion resistance
Self-locking with minimum backlash
Strong design structure, O ring system for water proof
Self-diagnosis fault alarm
Modular design
Mechanical interlock protection
Contact mode selection
Conditional control protection
1. Indicator
AOX-QL series local control linear electric actuator installs indicator in support axis, more intuitive and more convenient to observe.
2. Torque Switch
(Except AOX-QL-20/30/50/80) AOX-QL series local control linear electric actuator providing overload protection to avoid the damage of valve and electric actuator when jammed by cutting power automatically.
3. Installation
The installation size of AOX-QL series local control linear electric actuator meets international standard,If the installation of the valve does not match the size, then use other design .
|
Model |
Thrust |
Speed |
Max travel |
power |
Rated current(A) 50HZ |
Weight |
|||
|
Single-phase |
Three-phase |
||||||||
|
N |
mm/S |
mm |
W |
110V |
220V |
380V |
440V |
Kg |
|
|
AOX-QL-20 |
2000 |
0.66 |
60 |
20 |
1.10/0.95 |
0.55/0.54 |
0.30/0.30 |
N/A |
18 |
|
AOX-QL-30 |
3000 |
0.66 |
60 |
20 |
1.10/0.95 |
0.55/0.54 |
0.30/0.30 |
N/A |
18 |
|
AOX-QL-50 |
5000 |
0.66 |
60 |
20 |
1.10/0.95 |
0.55/0.54 |
0.30/0.30 |
N/A |
18 |
|
AOX-QL-80 |
8000 |
0.33 |
60 |
20 |
1.10/0.95 |
0.55/0.54 |
0.30/0.30 |
N/A |
18 |
|
AOX-QL-100 |
10000 |
0.50 |
60 |
40 |
1.65/1.67 |
0.88/0.84 |
0.31/0.31 |
0.30/0.31 |
30 |
|
AOX-QL-160 |
16000 |
0.50 |
100 |
40 |
1.67/1.67 |
0.89/0.85 |
0.31/0.31 |
0.30/0.31 |
32 |
|
AOX-QL-200 |
20000 |
0.44 |
100 |
90 |
1.85/1.86 |
0.92/0.92 |
0.35/0.35 |
0.34/0.34 |
33 |
|
AOX-QL-250 |
25000 |
0.44 |
100 |
90 |
3.60/3.62 |
1.55/1.58 |
0.59/0.59 |
0.58/0.58 |
34 |
|
AOX-QL-300 |
30000 |
0.44 |
100 |
90 |
3.65/3.62 |
1.60/2.20 |
0.60/0.59 |
0.59/0.59 |
35 |
|
Shell |
Enclosure :IP67,NEMA4, Exd II CT5 |
|
|
|
Standard:220VAC/1ph Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz, ±10% 24VDC/110VDC/220VDC |
|
|
Motor |
Asynchronous motor |
|
|
Limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Auxiliary limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Torque switch |
Close/Open, each 1, SPDT,250VAC 10A |
Except AOX-QL-20/30/50/80 |
|
Fail safe/ |
Internal-placed thermal protection, Open 115℃ ±5℃/Close 97℃ ± 5℃ |
|
|
Indicator |
Continuous position indicator |
|
|
Manual operate |
Declutching mechanism, operate by handwheel |
|
|
Self-locking device |
Self-locking by worm and worm gear |
|
|
Space heater |
30W(110V/220VAC) |
|
|
Conduit entry |
2 × PF 3/4” |
|
|
Ambient temperature |
-30℃～+70℃ |
|
|
Lubrication |
Grease moly（EP type） |
|
|
Material |
Steel, Aluminum alloy, Aluminum bronze,Polycarbonate |
|
|
Ambient humidity |
Max 90％RH |
Non-Condensing |
|
Anti-vibration |
X Y Z 10g,0.2～34 Hz,30 minutes |
|
|
External coating |
Dry powder, Epoxy polyester,high anti-corrosion |
|
|
No. |
Option scheme |
Remark |
|
1 |
Explosion-proof actuator（Exd ⅡCT5） |
AOX-QL series |
|
2 |
Potentiometer unit（1K-10K） |
AOX-QL series |
|
3 |
Proportion control unit (control signal 4-20mA DC/1-5V/1-10V) |
AOX-QL series |
|
4 |
Local control units (local control open/stop/close optional switch, local/remote switch) |
AOX-QL series |
|
5 |
Direct current motor(24VDC) |
AOX-QL series |
|
6 |
Water-proof actuator (IP68,10M,250HR) |
AOX-QL series |
|
7 |
Reverse electromagnetic control and transmission integrated motor starter |
AOX-QL series |
|
8 |
Torque switch (SPDT× 2 250VAC 10A) |
Except AOX-QL-20/30/50/80 |
|
9 |
Electric current position sensor (output 4-20mA DC) |
AOX-QL series |
|
10 |
High temperature resistance actuator (-10℃～+100℃) |
AOX-QL series |
|
11 |
Low temperature resistance actuator (-40℃～+70℃) |
AOX-QL series |
|
12 |
Bus Control Unit |
AOX-QL series |
Installation, maintenance and storage
1. The electrical installation of the AOX-QL series local control linear electric actuator shall be carried out according to the relevant construction requirements of the electrical installation, and the explosion-proof products shall be carried out in accordance with the requirements of the “Installation Specifications for Electrical Equipment in Explosive Hazardous Locations”.
2. AOX-QL series local control linear electric actuator should be maintained frequently. For places with high vibration, always check whether the fasteners are loose, whether the connectors are in good contact and whether the locking is reliable.
3. Pay attention to the handling during transportation, and use the forklift to load and unload according to the weight of the AOX-QL series local control linear electric actuator mechanism model to avoid impact and damage the quality of the product.
4. It should be stored in a dry and ventilated room. To prevent moisture intrusion from the ground, it should be placed on the shelf or separated by wooden boards.
In ensuring product quality at the same time, we also pay attention to the details of control, especially product packaging, fine packaging can effectively ensure the appearance of AOX-QL series local control linear electric actuator and give customers a good experience.
Q: How long can I expect to get the sample of AOX-QL series local control linear electric actuator?
A :The samples will be ready for delivery in 3-5 days The samples will be sent va international express such as DHL ,UPS ,TNT, FEDEX and would be arrived within 3-5 days.
Q: What is your Packing details?
A: Carton & Plywood Case/According to customers' requirement.
Q:Can you produce according to customer’s own technical drawings?
A:Yes, we provide personalized customization services.