Fast part turn electric actuator
Product Description
Product Detail
Torque range：30~5000N.m
Switching time：20~200 S
Protection：IP67, (IP68 optional)
Voltage：AC110~265V , AC / DC 24V Multi voltage input
Mounting Flange（ISO 5211）：F04/F05/F07/F10/F12/F14/F16
Output signal(On-off type): Fully open & fully close passive contact(2A 250VAC).
Type of On-off Signal: Contact signal. Pulse signal
Type of Modulating Signal: 0-10V, 2-10V, 4-20mA, etc.
1. Multi-voltage:The voltage of AOX-R series fast part turn electric actuator can be 220VAC,380VAC,110VAC and 24VDC.
2. Captive cover bolt:The bolt waws designed to prevent losing bolt during maintenance or installation.
3. Standard 4 limit switches:Providing 2 limit switch for full opened and 2 limit switch for full cloased.
4. Fully enclosed squirrel-cage asynchronous motor:The motor of AOX-R series fast part turn electric actuator is a specially designed induction motor that produces high starting torques and thermally protected from overheating.
The anti-shedding nut of AOX-R series fast part turn electric actuator can be kept loose even under strong field vibration to ensure accurate positioning.
|
Model |
Max output torque |
Operating Time 90° |
Drive shaft(mm) |
Power |
Rated current（A） |
Weight |
|
|
N·M |
( 90°) |
Square |
Deep |
(W) |
220VAC/1ph |
(kg) |
|
|
AOX-R-003 |
30 |
20 |
11×11 |
15.5 |
8 |
0.25 |
2.1 |
|
AOX-R-005 |
50 |
30 |
14×14 |
18 |
10 |
0.24 |
3.6 |
|
AOX-R-008 |
80 |
30 |
14×14 |
18 |
10 |
0.26 |
3.6 |
|
AOX-R-010 |
100 |
30 |
17×17 |
22.5 |
15 |
0.40 |
4.6 |
|
AOX-R-015 |
150 |
40 |
17×17 |
22.5 |
15 |
0.42 |
4.6 |
|
AOX-R-020 |
200 |
30 |
22×22 |
26 |
60 |
0.28 |
13 |
|
AOX-R-030 |
300 |
30 |
22×22 |
26 |
60 |
0.32 |
13.4 |
|
AOX-R-040 |
400 |
30 |
22×22 |
26 |
60 |
0.34 |
13.8 |
|
AOX-R-060 |
600 |
40 |
27×27 |
32.5 |
60 |
0.35 |
14 |
|
AOX-R-080 |
800 |
40 |
27×27 |
32.5 |
90 |
0.56 |
14.3 |
|
AOX-R-100 |
1000 |
40 |
27×27 |
32.5 |
90 |
0.59 |
14.5 |
|
AOX-R-160 |
1600 |
60 |
Max Φ40 |
65 |
90 |
0.60 |
68 |
|
AOX-R-200 |
2000 |
60 |
Max Φ40 |
65 |
90 |
0.62 |
68 |
|
AOX-R-300 |
3000 |
120 |
Max Φ40 |
65 |
90 |
0.64 |
68 |
|
AOX-R-400 |
4000 |
200 |
Max Φ40 |
65 |
90 |
0.66 |
68 |
|
AOX-R-500 |
5000 |
200 |
Max Φ40 |
65 |
90 |
0.67 |
68 |
|
Shell |
Aluminum alloy Shell, Enclosure:IP67,IP68 is optional |
|
|
Power |
Standard:220VAC/1ph Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz, ±10% 24VDC/110VDC/220VDC |
|
|
Controlling power |
110/220VAC/1ph，50/60 Hz, ±10% |
|
|
Motor |
Squirrel-cage asynchronous motor |
|
|
Limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Auxiliary limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
|
Travel |
90°～270°±10°(Please specify in advance if over 90°) |
0°～270° |
|
Fail safe/ |
Internal-placed thermal protection, Open 120℃ ±5℃/Close 97℃ ± 5℃ |
|
|
Indicator |
Continuous situation indication |
|
|
Manual operation |
Mechanical handle（Handwheel is optional） |
|
|
Self-locking device |
Self-locking by worm and worm gear |
|
|
Mechanical limit |
2 x external adjustable stopper |
|
|
Space heater |
30W (110/220VAC) Anti-condensation |
|
|
Conduit entries |
2 Pieces M18*1.5（AOX-R-003 except） |
|
|
Ambient temperature |
-25℃～+70℃（-30℃、-40℃、-60℃ optional） |
|
|
Lubrication |
Grease moly（EP type） |
|
|
Material |
Steel, Aluminum alloy, Aluminum bronze, Polycarbonate |
|
|
Ambient humidity |
Max 90％RH |
Non-Condensing |
|
Anti-vibration |
X Y Z 10g,0.2～34 Hz,30 minutes |
|
|
External coating |
Dry powder, Epoxy polyester |
|
|
No. |
Option scheme |
Remark |
|
1 |
Heater |
AOX-R Series |
|
2 |
Water-proof actuator(IP68,10M,250HR) |
AOX-R Series |
|
3 |
Potentionmeter unit(1k-10k) |
Exceot AOX-R-003 |
|
4 |
Proportion control unit(Control signal 4-20mA DC/1-5V/10V) |
AOX-R Series |
|
5 |
Local control units (Local control open/stop/close optional switch, local/remote switch) |
Exceot AOX-R-003 |
|
6 |
Travel 120°, 180°,270° |
AOX-R Series |
|
7 |
Direct current motor(24VDC) |
AOX-R Series |
|
8 |
Electric current position sensor (Output 4-20mA DC) |
Exceot AOX-R-003 |
|
9 |
Self-reset when power failure |
AOX-R Series |
|
10 |
Quick opening(2.8s,5s,10s,15s) |
AOX-R Series |
Before working
1. AOX-R series fast part turn electric actuator and valves have been properly installed and connected.
2. The fixing screws, connecting parts and electrical connection parts of the location are tightened.
3. Grounding and equipotential bonding are properly implemented.
4. The electrical connection is correct.
5. The source supply voltage must always be on the nameplate and moving or moving parts.
6. AOX-R series fast part turn electric actuator and valves are intact.
7. The ambient temperature is within the working limits of the electric actuator.
AOX believes that only a solid software and hardware foundation can achieve long-term and stable development. We have established some advanced computer aided systems, such as product design, resource management, production management and so on. A precision machining platform with CNC machining center as the core is established. We will continue to establish and improve a documented management system to produce more reailable AOX-R series fast part turn electric actuator for all our customers.If you are interested in our products,please contact me by E-mail zjaox09@zjaox.com.
We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.
Q: How can order the AOX-R series fast part turn electric actuator without any acknowledge of import ?
A :We could arrange you shipping or air or express for you and deliver everything to your port or provide you door to door service.
Q: Are you able to customize the enclosure designs suiting our needs?
A: We've always tried to provide our buyers with customized services, if technically and resonable cost allowed.
Q:How can I choose the right AOX-R series fast part turn electric actuator for us?
A:You can send us your technical requirements, such as power supply voltage, torque value, we will choose the most suitable actuator according to your requirements.