Compact spring return pneumatic actuator
Product Description
Product Detail
Extensive products range allows best versatility at lower price
Innovations and patented solutions for a universal drive shaft
Compact housing design, suitable for any application and working environment
Operating media:Dry or lubricated air, the non-corrosive gases or oil.
Air supply pressure:Double acting: 2-8Bar;Spring return: 2-8Bar
Openrating temperature:Standard:-20°C +80°C
Highest pressure:The maximum input pressure is 8 Bar
Surface material: Hard anodized
ACCESSORIES AVAILABLE
• Different Square reductions suitable for drive shaft
• Brackets
• Couplings
• Solenoid valves
• Limit switch boxes
• Proximity switches
1. Indicator for AOX-P series compact spring return pneumatic actuator.
Multifunctional location indicator, in field visible indicator and standard socket in accordance to VDI/VDE3845、NAMUR could be installed and export all the accessories .
2. Top/side mounting standard.
The air supply interface is built according to NUMAR standard. To the interface the NUMAR solenoid valve can be installed directly.
3. Bottom mounting standard
The pontes of AOX-P series compact spring return pneumatic actuator are built in according to latest version of ISO5211,DIN3337(F03-F25) to guarantee the interchangeability and versatility of the products.
4. A single compact design utilizing identical body and end caps for both double acting and spring return models. This feature reduces inventory and allows field conversion, by adding or removing modular spring cartridges.
|
Type |
Max. Pressure |
Rotate Angle |
Operating Temperature |
Stoke adjustment Per1°laps |
Diameter φ（mm） |
Ayr Volume(L) |
Moving time(sec)(A) |
||
|
Opening |
Closing |
Opening |
Closing |
||||||
|
DR/SC00015 |
Dry or Lubricating Clean Comperssed Air 8bar |
90°±4° or Full Stroke 0°~90° |
ST(standard)NBR O-ring-20 to +80 HT(high Temperature)FPM 0-ring-15 to +150 Lt(low Temperature)Silicon 0-ring-40 to +80 |
1/6 |
50 |
0.1 |
0.2 |
DR 0.2 |
DR 0.3 |
|
SC 0.3 |
SC 0.3 |
||||||||
|
DR/SC00030 |
1/6 |
63 |
0.2 |
0.3 |
DR 0.3 |
DR 0.3 |
|||
|
SC 0.3 |
SC 0.4 |
||||||||
|
DR/SC00060 |
1/5 |
75 |
0.3 |
0.5 |
DR 0.3 |
DR 0.4 |
|||
|
SC 0.4 |
SC 0.5 |
||||||||
|
DR/SC00100 |
1/5 |
88 |
0.5 |
0.8 |
DR 0.4 |
DR 0.5 |
|||
|
SC 0.5 |
SC 0.6 |
||||||||
|
DR/SC00150 |
1/5 |
100 |
0.7 |
1.1 |
DR 0.5 |
DR 0.6 |
|||
|
SC 0.7 |
SC 0.9 |
||||||||
|
DR/SC00220 |
1/5 |
115 |
1.2 |
1.8 |
DR 0.7 |
DR 0.8 |
|||
|
SC 0.9 |
SC 1.1 |
||||||||
|
DR/SC00300 |
1/4 |
125 |
1.5 |
2.3 |
DR 0.9 |
DR 1.1 |
|||
|
SC 1.2 |
SC 1.4 |
||||||||
|
DR/SC00450 |
1/4 |
145 |
2.4 |
3.8 |
DR 1.2 |
DR 1.4 |
|||
|
SC 1.5 |
SC 1.8 |
||||||||
|
DR/SC00600 |
1/4 |
160 |
3.1 |
4.9 |
DR 1.5 |
DR 1.7 |
|||
|
SC 1.8 |
SC 2.1 |
||||||||
|
DR/SC00900 |
1/4 |
180 |
4.3 |
6.9 |
DR 2.0 |
DR 2.2 |
|||
|
SC 2.4 |
SC 2.8 |
||||||||
|
DR/SC01200 |
1/4 |
200 |
5.9 |
9.5 |
DR 2.7 |
DR 3.2 |
|||
|
SC 3.5 |
SC 4.0 |
||||||||
|
DR/SC02000 |
1/4 |
240 |
10.0 |
15.2 |
DR 3.5 |
DR 4.0 |
|||
|
SC 4.1 |
SC 4.6 |
||||||||
|
DR/SC03000 |
1/4 |
265 |
14.5 |
21.4 |
DR 4.0 |
DR 4.5 |
|||
|
SC 4.5 |
SC 5.0 |
||||||||
|
DR/SC05000 |
1/4 |
330 |
25.0 |
40.0 |
DR 6.0 |
DR 7.0 |
|||
|
SC 7.5 |
SC 8.5 |
||||||||
The air source pressure comes into the body of AOX-P
series compact spring return pneumatic actuator between the two pistons from air
entrance (2) and pushes the pistons toward the end of the cylinder body while
the springs at each ends inside the cylinder body is forced to shrink with the
air between the pistons and the ends of the cylinder body released from air
entrance (4).in the meantime, the racks of pistons drive the output shaft (gear
wheel) simultaneously to rotate anticlockwise. After the direction of the air source
pressure is reversed by the solenoid valve, the springs at each end begin to
reset and the pistons are forced toward each other by the elasticity with the
air between two pistons released from air entrance (2). Meanwhile the output
shaft (gear wheel) would be driven by the racks of the pistons simultaneously
to rotate clockwise. (if the pistons are assembled in different direction from
each other, the output shaft would turn out to rotate in inverse direction when
the springs reset, namely the single acting reverse SO type)
1. We are manufacture for more than 20 years. Our company was founded in 1997,We are specialize in R&D, designing, and producing of AOX-P series compact spring return pneumatic actuator.
2. We are an informationization company，We have OA system, ERP system, CRM system, that can help us to management, control quality.
3. We have a rapid after-sales response mechanism. When we receive customer feedback on after-sales issues, we will arrange technology to find problems and quickly provide solutions.
We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.
Q : How long is the sample time of the slipper?
A :The regular AOX-P series compact spring return pneumatic actuator we all have in stock, if it is specially customized it takes about 3-5 days.
Q. The question about payment or other question about AOX-P series compact spring return pneumatic actuator:
A :Pls email me or chat with me directly.
QQ: 2864920739 E-mail: zjaox09@zjaox.com
Skype: Peter Zjaox
Q: If I'm interested in your AOX-P series compact spring return pneumatic actuator when I can receive your quotation and detail information after send the inquiry?
A:All your inquiry will be replied in 24hours.